Useful Tips

How to make a slime at home - 8 best ways

Pin
Send
Share
Send
Send


If your child is tired of playing with his old toys, and he asks for a new one, it is not necessary to immediately run to the store to please the baby. After all, there is a great toy that will take it and help in the development of motor skills. Such a toy is a lizun - this is a jelly-like substance that can entertain both you and your child, and most importantly, a lizun can be made with your own hands at home from various materials. There are a lot of ways to make it, and in this article we will tell you 10 ideas on how you can make a lizun with your own hands from improvised materials at home.

Sodium tetraborate slider with detergent

If you have no time to run to the pharmacy, and a lizun needs to be done right now, then this manufacturing option will suit you. This version of the slime in appearance and to the touch is as similar as possible to the purchased one. But since such a lizun contains detergent in its composition, then after use you need to wash your hands.

You will need:

  • Dishwashing liquid
  • Soda
  • Mixing tank
  • Hand cream
  • Dye

Working process:

  1. First, mix the dishwashing detergent and soda in a 1: 2 ratio. Mix well.
  2. Now add the hand cream and mix. The amount of glue must be determined during mixing.
  3. And add the dye.
  4. When all the ingredients are thoroughly mixed, the mass should get a little liquid consistency.
  5. Place our not-yet-ready slime in a bag and put in the refrigerator for 4 hours.
  6. At the end of time we take out the slime.

Nail polish slime

Another version of the lizun, which is made from the ingredients that every housewife has. It turns out a bright color and the hue practically does not change during the preparation of the slime. Let's see how to make such a bright and simple lick with your own hands.

You will need:

  • Colored nail polish
  • PVA glue
  • Water
  • Mixing tank
  • Sodium tetraborate

Working process:

  1. To begin with, we connect two components: glue and nail polish. Mixing thoroughly.
  2. Now add water at room temperature in a proportion of 1 part glue and 1 part water. Mix.
  3. Now we need to gradually add sodium tetraborate, stirring our mixture. We do not add right away to see what consistency we get, softer, or harder.
  4. When you mix everything thoroughly, you will see that the slime itself is formed into one mass. All the slime is ready!

Titanium glue slime

The simplest in composition of the slime can be made from ordinary glue titanium and water. It turns out plastic, but looks like a dense, viscous mass. It is good to use it for very young children, since its density does not allow it to break at the slightest exertion. Now let's see how to make the easiest slime.

You will need:

  • Clay "Titan"
  • Water
  • Paints
  • Mixing tank

Working process:

  1. Pour glue into the container and mix with dye.
  2. Now add to the mass of water, in a ratio of about 1: 1.
  3. Stir the solution until our slime stops sticking to our hands.
  4. The slime is ready!
  5. For a good example, you can watch the video instruction.

Edible Slime from Nutella

If you want to please your child with more than just an original toy, then you can make an edible slime. It is made from ordinary nutella and marshmallows marshmallows. But to make it you need a lot of patience. So, let's get started.

You will need:

  • Nutella Pasta
  • Marshmallows marshmallows
  • Mixing tank

Working process:

  1. Calculate your portion by calculating the composition. For 1 tablespoon nutella, you need 2 marshmallows.
  2. We need to melt the marshmallows in the microwave, mixing, you get a mass similar to cream or shaving foam.
  3. Now mix the marshmallows with the nutella, mix thoroughly. It will take a long time to interfere, but the result will please you. And most importantly, such a toy can be eaten.

How to make an edible slime

Another option for edible slime is to make it from mamba or frutel chewing candies. Such a slime is not durable, as it freezes when it cools. But you can eat it and it has a pleasant aroma.

You will need:

  • Fruits or mamba candies
  • Powdered sugar
  • Water bath

Working process:

  1. Remove all sweets from the packaging.
  2. Fold in a container and place in a water bath. While stirring, melt all the sweets.
  3. When the mixture cools down a little, transfer to a container in which sugar powder is poured in advance.
  4. Roll the mass in powder until our lizun stops sticking to his hands.
  5. Now you can give your child our edible toy.

Video how to make a slice of frutel

Jumping slider

If you want to make not just a slime, but also a jumper. It is very interesting to play with such a lizun, and the ingredients that make up the composition are in almost every home. Let's see the full description with step-by-step instructions.

You will need:

  • Silicate glue
  • Sodium tetraborate
  • Paint
  • Sequins

Working process:

  1. Pour glue and some dye and glitter into the container.
  2. Next, add sodium tetraborate and mix thoroughly until our mass thickens.
  3. Now you can try your slime.

Transparent lizun

If you didn’t have any dyes at hand, or you just want to make a transparent slime, then this recipe is for you. You can do it very simply and quickly, so let's get started with doing the slime with our own hands.

You will need:

  • Silicate glue 125 ml.
  • Water 250 ml.
  • Sodium tetraborate

Working process:

  1. Pour glue and water into a bowl and mix thoroughly.
  2. Dissolve sodium tetraborate in 125 ml. water and pour into the mass with glue.
  3. Thoroughly mix the mixture until the mass coagulates and a slime forms.
  4. Now you can give the child, or play for yourself with this entertaining toy.

Magnetic slime

If you need an unusual slime, then you can make it magnetic. To do this, you will need ordinary iron shavings and a magnet. So, let's start the process of fulfilling our slime.

You will need:

  • PVA glue
  • Boric acid
  • Iron shavings
  • Magnet

Working process:

  1. Mix glue, boric acid and iron chips.
  2. Mix for a long time until the consistency becomes like a slime.
  3. Now you can play such a lizun with a magnet.

Sodium tetraborate slime

I want to offer you another option for the manufacture of lizun without the use of sodium tetraborate. In this recipe, only 3 ingredients are used, and then one of them is a regular dye. Let's see how to cook a lizun with your own hands.

You will need:

  • Silicate glue
  • Liquid powder
  • Dye

Working process:

  1. Pour glue into a bowl and add dye. Mix everything thoroughly.
  2. Now add 1: 1 liquid powder to the mixture.
  3. Stir the mixture until it thickens and becomes a slime.

Video how to make lizun without sodium tetraborate

How to make a slime at home


Despite its rather long-standing invention, lizun (handgam, slime) is still popular. He develops imagination and fine motor skills, and it’s just fun with him! Of course, you can buy a finished slime in the store, but its composition is far from natural and safe, so often parents want to make it themselves in order to protect their child. Well, older children will be interested in making it themselves.

So, here are a few recipes that differ in composition and degree of difficulty in cooking.

How to make lizuna from shampoo and salt

This recipe is perhaps the simplest, but requires patience and accuracy.

You will need only two ingredients:

  • shampoo - 3-4 teaspoons
  • salt - just a little bit

It's simple: pour shampoo into a container and pour salt (on the tip of a spoon). Mix thoroughly and put in the refrigerator for 20 minutes. Voila! Slime is ready! However, it will not be like a store one: it sticks to your hands a little and is more suitable for playing with your fingers.

Try to take a thicker shampoo. It is also better to take some kind of beautiful color (there are a lot of such ones now) to get a beautiful result. And remember: there should be very little salt!

How to make a plasticine slime

This handgam turns out fluffy and viscous and pleasant to the touch.

You will need:

  • transparent stationery glue - 200 ml
  • "Borax" (sodium tetraborate)
  • light clay or mass for modeling - 20 g

First, in a separate container, mix 0.5 teaspoon of borax and 350 ml of hot water. Mix thoroughly so that sodium tetraborate is completely dissolved. Let the liquid cool.

Pour sodium tetraborate and fill it with hot water.

In the second container, mix 20 g of plasticine and 200 ml of glue. We tear plasticine into small pieces and add it to the glue. Mix until smooth. Little by little we add the borax solution to the resulting mass and, as it were, collect the lizun in a pile. We do this until it stops sticking. If this does not happen, then dip the resulting mass into the remaining borax solution and after that remember it in your hands. Everything should work out!

In a separate container, mix glue and plasticine.

You can also do it in another way.

You will need:

Dilute a bag of gelatin according to the instructions and leave for 1 hour. Heat 50 ml of water and pour plasticine into small pieces. Stir constantly, warm until plasticine dissolves.

Add gelatin to the resulting liquid, while continuing to mix until a homogeneous mass is obtained. Let it cool. Here is your handgam!

How to make lizun from soap and salt

You will need:

The recipe is similar to the shampoo recipe. In 3-4 teaspoons of liquid soap, add a little dye and a couple of salt crystals. All this is thoroughly kneaded and placed in the refrigerator for 5-10 minutes. After that, mix again and you can play! This handgam turns out to be slightly spreading.

In general, liquid soap will need as much as the size of the slime you want. If the soap was of some beautiful color, then the dye can not be used.

How to make a shaving foam slime

You will need:

  • shaving foam
  • PVA glue
  • borax (sodium tetraborate)
  • water
  • dye

First mix water with borax so that it dissolves. Then squeeze out as much shaving foam into another container as we want to get the size of handgams, add 100 ml of PVA glue and mix until the foam becomes viscous and the mass is homogeneous. Add a couple of drops of dye and mix again. Now gradually add the borax solution, continuing to mix until the mass ceases to stick to the hands.

How to make a slime without:

Most recipes of “magic chewing gum” contain sodium tetraborate, also known as “borax” - this is the sodium salt of boric acid, the most common and used boron compound. This substance is sold in pharmacies, as possesses bacteriostatic activity and is not absorbed through intact skin.

It is not expensive. However, what to do if this remedy is not in the house, you don’t want to go out, and the child insists on making a slime? Let's look at alternative recipes.

How to make lizun without sodium tetraborate

To make such a toy in your home, you will need:

  • corn starch - 1 cup
  • room temperature water -1 cup
  • PVA glue - 5 teaspoons (25 ml)
  • food coloring
  • sequins (optional)

First you need to dissolve the starch. To do this, take ¼ cup of water, and pour the starch into it, stirring slowly. You need to stir until all the lumps are stirred. Bring the rest of the water to a boil in a saucepan and then add the starch obtained earlier. If you were able to immediately buy liquid starch, then all these manipulations do not need to be performed.

Now you need a plastic bag without holes. Put a third of the cooked starch in it, add a few drops of dye, glitter and pour in PVA. Close or tie the bag tightly and thoroughly “knead” (like dough) its contents until smooth. Drain the remaining liquid, and pat the resulting lizun with a napkin.

If the slime sticks to your hands, then there is too much glue, if it is hard or crumbles, you need to reduce the amount of starch. Also be careful with the dye: if you put it too much, the toy will paint your hands. The remaining starch can be used to make a magic chewing gum of a different color.

The received “product” has an expiration date of the order of a week.

How to make a slime without glue

Handgam made with this recipe is very popular and looks like butter.

You will need:

  • dry starch (any) - 3-4 tablespoons
  • dye
  • detergent (1 spoon)
  • body lotion - 1 spoon.

a) mix detergent and lotion, b) add starch

We mix all the ingredients until a mass is obtained that does not stick to the hands. If it turns out to be too liquid, add starch, and if it is too loose, add detergent and body lotion.

a) paint the resulting mass and knead, b) the slime is ready!

How to make a slime without starch

You will need only one main ingredient: toothpaste. Choose some beautiful color.

There are two ways to cook:

  1. In a water bath. Boil water. We squeeze out as much paste into the container as we want to get a magic chewing gum, put the container in boiling water over low heat and stir for 10-15 minutes. Excess moisture will evaporate from the paste, and it will become slightly loose. We take the resulting mass in our hands, which we pre-lubricate with any oil (olive, sunflower or baby) and mnem. In a few minutes, the slime is ready!
  2. In the microwave. Squeeze out as much paste into the container again, what size we want to get the handle, put the container in the microwave for 2 minutes. We take out, mix and put in the oven again for 3 minutes. Further, everything is also the same: we take the resulting mass in our hands, which we pre-lubricate with any oil and mnem. Voila!

As you can see, you can make this wonderful toy from almost everything that is at home. Have a good experiment!

And yet - do not be greedy and share on social networks!
This is the best thanks for us ...

Marshmallow slime

Now we will tell you how to make another do-it-yourself slime at home. This lizun turns out to not look like usual, but it has a very pleasant and airy consistency, which is very similar to marshmallows.

You will need:

  • Shaving foam
  • PVA glue
  • Sodium tetraborate

Working process:

  1. In a bowl, mix shaving foam and glue in a 3: 1 ratio.
  2. Now gradually add sodium tetraborate, stirring until a homogeneous mass is formed.
  3. If you want, you can also add dye.

Video how to make do-it-yourself marshmallow

In the end

In this article, we told you about 10 ways to make lizun at home. Now you can please yourself and your child with such an interesting toy, in addition, some of them can be eaten. I hope that this article was useful to you and you will cook some licks with your own hands to surprise your child.

Pin
Send
Share
Send
Send