Useful Tips

Bulk garage floor: polyurethane or epoxy?

Pin
Send
Share
Send
Send


In this garage, I decided to abandon porcelain stoneware in favor of an epoxy industrial coating.

I ordered impregnation and paint at the Rainbow factory. This material is made to order only. In stores, this makes no sense to search. In my garage - it's 50m2 without a workbench and a pit, taking into account a 15% discount, it went out for 20 tr. Immediately everything is packaged in buckets, signed.

Covered for 2 times, i.e. first one side, then a few days later, when the epoxy gained strength, on the other hand.

We start with a thorough vacuum cleaner. Everything that falls off and exfoliates must be rolled off and peeled off :-) Cement milk is also better to peel off. And more: concrete must be absolutely dry.

First, everything is poured with impregnation and leveled with a wide rubber spatula (I have 250mm). Then it is passed by a roller. The life of the solution is about 20-25 minutes in total. After mixing the resin with the hardener, the entire bucket must be poured onto the floor with strips. Otherwise, due to the oxidation reaction, the resin in the bucket will heat up and become a stake much earlier - in 5-7 minutes.

Bulk garage floor: polyurethane or epoxy?


When choosing a cover for a garage or depot, customers often find it difficult to make the right choice. Polyurethane or epoxy filler - which is better to use? Let's try to figure this out. Bulk profitpol.ru is a coating that perfectly copes with the effects of chemicals, with stains of oils and gasoline, with the remains of salt and dirt.

Polyurethane coatings are perfect for industrial facilities. They can safely be attributed to:

Warehouses and terminals.

Many clients of ProfitPol have been operating the completed constructs for a number of years without problems - they fully appreciated the advantages of polymer floors in their transport garages.

What is important for a quality garage floor?

The polymer construct in the garage must be able to withstand intense mechanical loads: rolls with spikes, slippage, gas leakage, etc. It must be immune to falls of fixtures and heavy tools.

The Poliflex and Polyplan constructs offered by the company are convenient in cleaning with any floor cleaning equipment. They are not afraid of humidity, fire, temperature fluctuations. The company's specialists will prepare your concrete foundation in the best way.

Whatever floor covering you order on the company’s website, the primary task is to level the concrete base in the garage using professional equipment:

flat milling cutters, etc.

In the garage, waterproofing must be provided at a decent level. This will prevent the formation of "lenses" under the concrete and tears of the base of the floor in the garage.

Before pouring the polymer filler, ProfitPol LLC craftsmen will perform the necessary work to improve the screed strength. The polymer component itself will be filled with the necessary temperature and humidity. As a result, you get a high-quality unpretentious universal coating that will stand without repair for several decades.

Epoxy garage floor - a worthy competitor to polyurethane?

This type of coating has a number of pronounced properties, which under certain operating conditions make its installation more preferable than coatings based on polyurethane. The quartz epoxy floor in the garage has the following properties:

Monolithic construction without visible seams.

Outstanding chemical resistance.

High abrasion resistance.

Epoxy coatings have excellent antistatic properties. Dust is not collected on them. In addition, when laying, these coatings do not "smell", which may be relevant in cases where the garage cannot be stopped.

When hardened, epoxy-quartz structures from ProfitPol LLC are absolutely safe for your health.

If you look at the completed epoxy bulk floors for a garage in our portfolio, you can reliably imagine what quality of coating ProfitPol LLC offers. Our floors for depots and garages calmly withstand a variety of loads, heavy traffic wheeled vehicles, machinery and mechanisms. Epoxy-quartz structures of various colors remain the most durable synthetic floors.

Our bulk coatings are not only not only impacts, but also the corrosive components of alkalis and gasolines. All this is quickly and completely cleaned without the slightest consequences for the floor in the garage.

The company ProfitPol LLC offers thin-layer and thick-layer constructs to its customers to choose from. Any of them, like the floor in the garage will be perfectly mounted. Whether it is an inexpensive Polyflex construct or a thick-layer Polyplast - we guarantee a long-lasting, uninterrupted work and the declared set of coating properties. Your floor in the garage will regularly delight you and your customers, and you will forget about operating costs.

Pin
Send
Share
Send
Send